1 Gallon of 10% Algaecide

SWIMMING POOLS
This product is compatible with most chemicals normally used in swimming pool maintenance. However, in its concentrated form, this chemical must not come in contact with high concentrations of chlorine or any other oxidizer. DO NOT MIX THIS PRODUCT AND CHLORINE OR ANY OTHER OXIDIZER TOGETHER before adding to the pool. These chemicals must be handled separately.

Initial Application for Swimming Pools
1. Backwash the filter thoroughly.
2. Vacuum algae debris and thoroughly brush pool.
3. Add 1 gal. of this product to each 50,000 gal. of water (25.69 oz. per 10,000 gal.).
4. Vacuum pool after 24 hours to remove dead algae.
6. Allow the filter to run for at least six (6) hours after adding algaecide. During this period, swimmers must
not be allowed into the water.
7.Once algae are under control, clean filter and return to normal operation.

Maintenance Application

Add 32 oz. of this product per 50,000 gal. of water (or equivalent use dilution) 5-7 days depending on pool size.

Booster Application

Add 32 oz. of this product per 50,000 gal of water (or equivalent use dilution) after a heavy or prolonged rainfall or when there is a heavy bathing load.